Login To Your Router

1. Login Page - If you already know your router's IP address is 1.1.1.1, click the buttons below until you get the login page:

   Admin Login Admin Login 2

2. Links Don't Work - If they time out, or take more than a few seconds to load, you must have the wrong IP address. Try one of these IP addresses:

   192.168.1.1192.168.0.1192.168.2.1192.168.1.254192.168.0.50

3. Login Info - You need to know your login information to get into your router. Look at the List above to see common default username and passwords. If you know what router you have, you can find it here for more detailed info. If you have changed the username and password on the router, but don't remember it, you will need to Reset Your Router.

Reset Your Router

Can't Login to Router?

1. On the back or bottom of the router there should be a small hole. You will need to fit something into that hole to press the reset button that is there, such as a paperclip.
2. With the router plugged in, press and hold the reset button for 30 seconds. After releasing the button, wait for the router to power on, and attempt to login to the router again.
3. If the above did not work, you can try what is known as a 30-30-30 reset. Get comfortable, because you will need to hold the reset button for 90 seconds. Press and hold the reset button for 30 seconds. While continuing to hold the reset button, unplug the router, wait another 30 seconds, then plug it back in. Continue to hold the reset button for another 30 seconds.

Can Login to Router

1. Login To Your Router
2. Look for links such as "Advanced", "Admin", "System" and click on them.
3. On the above pages, click on a link that says "Factory Reset", or "Factory Defaults".

Devices using 1.1.1.1: